U9815R Impulse Winding Tester

Pulse energy: Max.: 0.25 Joule
Pulse voltage: 100V~5000V， 10V steps，5%±10V
Inductance measuring range: ≥10uH
Sampling rate: max.100Msps, adjustable 10 levels
Determination method: Area, differential area, corona and differential phase
Number of high-voltage channels:

keywords: LCR Meter Capacitance Meter

File：

Category:

Impulse Winding Tester

Hotline:

0086-519-85505199

Consultation

product details

产品描述
Technical parameters
Order information
Instrument accessories
Optional accessories
Video data

- Commodity name: U9815R Impulse Winding Tester
- Commodity ID: 1070438798354698240
Pulse energy: Max.: 0.25 Joule Pulse voltage: 100V~5000V， 10V steps，5%±10V Inductance measuring range: ≥10uH Sampling rate: max.100Msps, adjustable 10 levels Determination method: Area, differential area, corona and differential phase Number of high-voltage channels:

Brief Introduction:

U9815R impulse winding tester adopts high stability & high-voltage impact power and thyristor module controlled high-voltage switching devices, which bring a substantial increase in the stability and reliability of the product. With advanced 32 bit CPU and high speed FPGA, 100Msps sampling rate and memory depth of 6500 bytes make the test more precise; the use of high speed testing technique make the maximum test speed up to 15 meas/sec. Layer short/ DC resistance two-in-one test greatly improves the test efficiency of testing coil products.

Features:

■ 65k color 7’’ TFT high definition display screen, selectable Chinese and English interfaces

■ Waveform sampling rate:100Msps; memory depth: 6500bytes

■ Max. Test speed: 15 meas/sec

■ Four waveform comparison methods: Area, differential area, corona and differential phase

■ Strong corona analysis and extraction function (several corona modes and corona display function) to excavate potential defective insulation of products

■ Excellent test repeatability to guarantee stable measurement

■ Instrument parameters automatic storage and boot-up file load function

■ Vertical exaggeration, horizontal zoom and movement of waveforms for detail observation

■ Sample average function, average processing of 32 standard waveforms

■ Automatic standard acquisition mode to select suitable sampling rate

■ Destructive testing bring the right test voltage for you

■ Fast test mode can make real-time change of impulse voltage and sampling rat

■ Imposed demagnetized impulse to ensure the conformity of the tested waveforms

■ 20000 pieces of historical measured data storage and discrimination statistics function; can be saved to the U-disk

■ Directly save the screen pictures (BMP, GIF, PNG) or waveform data to U-disk through SAVE key

■ System firmware upgrade through U-disk

■ Foot switch interface for easy and fast measurements

■ Handler、RS232C、USB Device、USB Host和GPIB(option)

Measurement display interface:

Layer short waveform and DC resistance can be displayed in the measurement display interface simultaneously.

Specifications
Model			U9815R
DC resistance test range			0.1mΩ~20kΩ（four-wire measurement）
DC resistance test accuracy			0.1mΩ~200mΩ ±(0.1% ± 0.5mΩ); 200mΩ~20kΩ ±0.1%
Impulse voltage			100V~5000V， 10V step，5%±10V
Inductance test range			≥10uH
Impulse energy			Max.: 0.25 Joule
Test speed			Max.15meas/sec
Applied pulses			Max. 32 of test pulse; max.8 of demagnetizing pulse
Input impedance			10M
Waveform acquisition			Sampling rate: max.100Msps, adjustable 10 levels;Resolution: 8 Bits;Memory Depth:6500 bytes;Sample average:1-32
Comparison methods			Area, differential area, corona and differential phase
Test repeated accuracy			±1%
Waveform measurement			Voltage/Frequency/Time of the waveform
Trigger Mode			Manual (including foot switch)/External/Internal/Bus
Display			800x480点65k color TFT, Waveform display range: 650x256, support 1.5 times magnifying display
Detection Output			OK/NG display, LED / alarm
Test statistics			Statistics function of measurement time and results, up to 20000 pieces
Memory		Internal	150 groups (standard waveform data and test setup parameters）
		U-disk	600groups (standard waveform data and test setup parameters)
Interface			HANDLER（START,STOP,PASS,FAIL ,BUSY,EOC） USB Slave，RS232C IEEE488（option） USB Host（support storage of BMP, GIF, PNG image files and firmware upgrade）
Power supply
Power supply			220V±10% 50Hz±5%
Power consumption			≤70VA
General conditions
Working environment	Temperature		0℃ - 40℃
	Humidity		≤75% R.H.
Weight			7.5Kg
Dimensio(WxHxD)			400mmx 132mmx350mm

U9815R Impulse Winding Tester

Recommended products

U9311 Hipot Tester

Insulation resistance test: No
AC test: 0.05kV-5kV ±（2% reading+5 digits）（50、60Hz selectable）
DC test: 0.05kV-6kV ±（2% reading+5 digits）
Output channel: 0.05kV – 1kV ±（1.0% reading+2V）
Grouping test function: AC
Interface configuration: PLC,RS232C

U822C Handheld LCR meter

Test frequency: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Basic accuracy: 0.1%
Test level: 0.6Vrms
Test speed: 10meas/sec(Fast), 5meas/sec(Med), 2meas/sec(Slow)
Internal bias: -----
Output Impedance: 100 Ω

U822A Handheld LCR meter

Test frequency: 100Hz, 120Hz, 1kHz, 10kHz
Basic accuracy: 0.1%
Test level: 0.6Vrms
Test speed: 10meas/sec(Fast), 5meas/sec(Med), 2meas/sec(Slow)
Internal bias: -----
Output Impedance: 100 Ω

U822 Handheld LCR meter

Test frequency: 100Hz，120Hz，1kHz
Basic accuracy: 0.1%
Test level: 0.6Vrms
Test speed: 10meas/sec(Fast), 5meas/sec(Mid), 2meas/sec(Slow)
Internal bias: -----
Output Impedance: 100 Ω

Online Message