U822C Handheld LCR meter

Test frequency: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Basic accuracy: 0.1%
Test level: 0.6Vrms
Test speed: 10meas/sec(Fast), 5meas/sec(Med), 2meas/sec(Slow)
Internal bias: -----
Output Impedance: 100 Ω

keywords: LCR Meter Capacitance Meter

File：

U822 series Operation Manual.pdf

Category:

LCR Meter

Hotline:

0086-519-85505199

Consultation

product details

产品描述
Technical parameters
Order information
Instrument accessories
Optional accessories
Video data

- Commodity name: U822C Handheld LCR meter
- Commodity ID: 1070412723893456896
Test frequency: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Basic accuracy: 0.1% Test level: 0.6Vrms Test speed: 10meas/sec(Fast), 5meas/sec(Med), 2meas/sec(Slow) Internal bias: ----- Output Impedance: 100 Ω

Brief Introduction:

Applying the latest impedance measurement technology and ultra-low-power design, EUCOL company released the handheld LCR digital bridge with powerful function, highest precision, fastest speed, longest standby time in the industry. Being equipped with clear and intuitive bright white backlight, clear and intuitive display, concise operating functions, maximum test frequency of 100KHz and high-capacity rechargeable battery, this LCR meter can meet accurate measurement requirements at any occasion. It is the ideal maintenance tool used in laboratories, production lines, maintenance point and teaching for the measurement and screening of inductance, capacitance and resistance.

Features :

■ Basic accuracy: 0.1%

■ Skid-resistant and anti-knock soft sheath

■ Maximum test signal frequency : 100kHz (U822C)

■ Standard bright white backlight make clear and intuitive display

■ 40000 counts for primary parameter, resolution of D/Q: 0.0001

■ Ultra-low power consumption; the power supply can be used for 24 hours of continuous work; standard rechargeable battery

■ Automatic identification (Ai) function can automatically determine and display the component types and measurements

■ Up to 10 times/sec of test speed; the fastest speed in the industry with automatic range design

■ Constant 100 Ohm output impedance

■ 4-level tolerance compare mode:1%/5%/10%/20%

■ Automatic identification of open / short calibration function

■ Recording function of data-hold and Max./Min./Average value

■ Practical function configuration options and work state hold capacity

■ Standard Mini-USB communication interface and SCPI command set

Function
Test Parameter			Primary parameters: L / C / R / Z Secondary parameters: D / Q / θ / ESR
Equivalent Circuit			Serial, Parallel
Parameter and Equivalent Mode			Hold/ Auto
Range Mode			Auto
Measurement Terminals			3-terminal, 5-terminal
Measuring Speed			10meas/sec(Fast), 5meas/sec(Med), 2meas/sec(Slow)
Calibration Function			Open, short
Comparator Function			1%，5%，10%，20%
Input fuse			0.1A / 250V
Communication interface			Mini-USB (virtual serial port)
Test signal
Test Frequency	U822		100Hz, 120Hz, 1kHz （120Hz, actual frequency is 120.048Hz, following is the same）
	U822A		100Hz, 120Hz, 1kHz, 10kHz
	U822C		100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Test Level			0.6Vrms
Output impedance			100 Ω
Display
Display			LCD dual display of Primary-Secondary parameters
Backlight			Battery-powered: when the backlight is on, the brightness is reduced by one half after 15 seconds and the light is automatically off after 30 seconds. Power adapter: the backlight is normally on, manual shutoff is needed.
Reading			Max. reading of primary parameters: 40,000 counts; secondary parameters: D/Q/ θ Minimum resolution: 0.0001
Hightest test accuracy			0.1%
Display Range		L	0.001uH --- 1000.0 H
		C	0.001pF --- 20.000mF
		R/Z	0.0001Ω --- 10.000MΩ
		Equivalent Series Resistance (ESR)	0.0000Ω -- 999.9Ω
		Loss factor D	0.0000 -- 9.999
		Quality factor Q	0.0000 -- 9999
		Phase angle θ	-179.9° -- 179.9°
Power Requirements
Battery model			7.2V Ni-MH 600mAH rechargeable battery
AC power adapter			Input：220V(1±10%)，50Hz(1±5%)；Output：12V DC
Working current			Maximum: 28 mA,Typical working condition of 1kHz frequency: 25mA (100Ω load))
Standby Current			Max.: 2μA
Battery life			24 hours (typical), nickel - hydrogen battery, with backlight off
Charging time and current			Single continuous charging time: 200min (maximum).Charging current: 42mA
Auto power off（Effective battery)			5min, 15min, 30min, 60min, OFF available; Factory Default : 5min
Battery capacity indicator			Real-time battery capacity indication
General specification
Working Environment	Temperature		0°C -- 40°C
	Relative humidity		≤ 90% R.H.
Weight			460g
Dimension (H × W × D)			192mm × 93mm × 44mm
Safety and electromagnetic compatibility			IEC 61010-1:2001; IEC 61326-2-1:2005

U822C Handheld LCR meter
U26010 Gilded short plate U26027 Four terminal Kelvin test clip leads U26029 SMD 4-terminal Kelvin test tweezers U26028 The AC power adapter U26031 7.2V NI-MH battery (built-in host)
U26030 Mini-USB通讯线

Recommended products

U9311 Hipot Tester

Insulation resistance test: No
AC test: 0.05kV-5kV ±（2% reading+5 digits）（50、60Hz selectable）
DC test: 0.05kV-6kV ±（2% reading+5 digits）
Output channel: 0.05kV – 1kV ±（1.0% reading+2V）
Grouping test function: AC
Interface configuration: PLC,RS232C

U822C Handheld LCR meter

Test frequency: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Basic accuracy: 0.1%
Test level: 0.6Vrms
Test speed: 10meas/sec(Fast), 5meas/sec(Med), 2meas/sec(Slow)
Internal bias: -----
Output Impedance: 100 Ω

U822A Handheld LCR meter

Test frequency: 100Hz, 120Hz, 1kHz, 10kHz
Basic accuracy: 0.1%
Test level: 0.6Vrms
Test speed: 10meas/sec(Fast), 5meas/sec(Med), 2meas/sec(Slow)
Internal bias: -----
Output Impedance: 100 Ω

U822 Handheld LCR meter

Test frequency: 100Hz，120Hz，1kHz
Basic accuracy: 0.1%
Test level: 0.6Vrms
Test speed: 10meas/sec(Fast), 5meas/sec(Mid), 2meas/sec(Slow)
Internal bias: -----
Output Impedance: 100 Ω

Online Message